Kia Stinger: Theft-alarm system / Armed stage

Kia Stinger CK 2018-2021 Owners Manual / Features of your vehicle / Theft-alarm system / Armed stage

Park the vehicle and stop the engine. Arm the system as described below.

1. Turn off the engine.

2. Make sure that all doors (and liftgate) and engine hood are closed and latched.

3. Lock the doors by depressing the door lock button on the smart key.

After completion of the steps above, the hazard warning lights will blink (for smart key, the chime also sounds) once to indicate that the system is armed.

If any door (or liftgate) or engine hood remains open, the hazard warning lights and the chime will not operate and the theft-alarm will not arm. If all doors and liftgate and engine hood are closed after the lock button is pressed, the hazard warning lights blink once.

The system can also be armed by locking the doors with the key from the front doors; however, the hazard warning lights will not blink using this method.

✽ NOTICE

The theft-alarm system can be deactivated by an authorized Kia dealer. If you want this feature, consult an authorized Kia dealer.

Do not arm the system until all passengers have left the vehicle. If the system is armed while a passenger( s) remains in the vehicle, the alarm may be activated when the remaining passenger(s) leave the vehicle. If any door (or liftgate) or engine hood is opened within 30 seconds after the system enters the armed stage, the system is disarmed to prevent an unnecessary alarm.

Theft-alarm system
This system is designed to provide protection from unauthorized entry into the vehicle. This system is operated in three stages: the first is the “Armed” stage, the second is the “Theft-al ...

Theft-alarm stage
The alarm will be activated if any of the following occurs while the system is armed. A front or rear door is opened without using the smart key. The liftgate is opened without using the smart ...

Other information:

Kia Stinger CK 2018-2021 Service Manual: Rear Spoiler


Repair procedures Replacement    Put on gloves to protect your hands.    • Use a plastic panel removal tool to remove ...

Kia Stinger CK 2018-2021 Service Manual: Starter


Specifications Specification Item Specification Rated voltage 12 V, 1.2 kW The number of pinion teeth 11 Performance [No-load, 11 V] Ampere Max. 70 A ...

Copyright © www.kstinger.com 2015-2021