Kia Stinger: Lighting / Check headlight

This warning message illuminates if there is a malfunction (burned-out bulb except
LED lamp or circuit malfunction) with the headlamp. In this case, have your vehicle
inspected by an authorized Kia dealer.
✽ NOTICE
- When replacing the bulb, use the same wattage bulb. For more information,
refer to “BULB WATTAGE” in chapter 8.
- If a different wattage bulb is installed on the vehicle, this warning
message is not displayed.
The ignition switch must be on for the turn signals to function. To turn on the
turn signals, move the lever up or down (A). The green arrow indicators on the instrument
panel indicate which tur ...
Automatic type
To ensure the proper headlight beam is used under various conditions, the headlight
beam levels are automatically adjusted depending on the number of passengers, the
weight in the ...
Other information:
Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly.
Only open the hood with the vehicle on a flat surface, engine is turned off,
shift lever placed in P (Park) position and setting the parking brake.
2. Go to the front of the vehicle, raise the ...
Depress the brake pedal.
Shift into N (Neutral) with an Automatic transmission.
Press the CANCEL switch.
Decrease the vehicle speed lower than the set speed by 20 km/h (12 mph).
Decrease the vehicle speed to less than approximately 25 km/h (15 mph).
Each of these actions will cancel ...