Kia Stinger: Heating, Ventilation And Air Conditioning / Controller

Intake Actuator

Description and operation Description Located in the blower unit, the intake actuator regulates the intake door by a signal from the control unit. Pressing the intake selection switch ...

Heater & A/C Control Unit (DATC)

Components and components location Components Connector Pin Function Connector A Pin NO Function Pin NO Function ...

Other information:

Kia Stinger CK 2018-2025 Service Manual: Balance Shaft & Oil Pump

Repair procedures Removal BSM (Balance Shaft Module) Chain System 1. Remove the timing chain. (Refer to Timing System - "Timing Chain") 2. Install a stopper pin (A) after compressing the balance shaft chain tensioner. ...

Kia Stinger CK 2018-2025 Service Manual: Crash Pad

Components and components location Components 1. Cowl cross member bar 2. Main wiring 3. Main crash pad 4. Side air vent duct [RH] 5. Crash pad under cover [RH] 6. Crash pad lower panel [RH] 7. Crash pad center lower cover 8. Glove box housing ...