Contents:
Your mirror will automatically dim upon detecting glare from the vehicles traveling behind you. The autodimming function can be controlled by the Dimming ON/OFF Button:
1. Pressing the
button turns the
auto-dimming function OFF which is indicated by the green Status Indicator LED turning
off.
2. Pressing the
button again turns
the auto-dimming function ON which is indicated by the green Status Indicator LED
turning on.
✽ NOTICE
The mirror defaults to the ON position each time the vehicle is started.
Z-Nav™ Compass Display
The NVS® Mirror in your vehicle is also equipped with a Z-NAV™ Compass that shows the vehicle Compass heading in the Display Window using the 8 basic cardinal headings (N, NE, E, SE, etc.).
❈ Z-Nav™ is a registered trademark of Gentex Corporation.
Kia Stinger (CK) 2018-2023 Owner's Manual: Turn Signal Lamp
Repair procedures Removal Door Mirror Turn Signal Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the outside rear view mirror. (Refer to Body - "Outside Rear View Mirror") 3. Remove mirror (A) to the direction as shown in the picture using (-) screw driver.Kia Stinger (CK) 2018-2023 Owner's Manual: Drive Belt Tensioner
Repair procedures Removal and Installation 1. Remove the drive belt. (Refer to Drive Belt System - "Drive Belt") 2. Remove the drive belt auto tensioner pulley (A). Tightening torque : 53.9 - 63.7 N·m (5.5 - 6.5 kg·m, 39.8 - 47.0 lb·ft) Tensioner pulley bolt is left-hands screw.