Kia Stinger: Lighting / Dynamic Bending Light (DBL)

Kia Stinger CK 2018-2025 Owners Manual / Features of your vehicle / Lighting / Dynamic Bending Light (DBL)

Dynamic Bending Light (DBL) uses the steering angle and vehicle speed, to keep your field of vision wide by swiveling and leveling the headlamp.

Change the switch to the AUTO position when the engine is running. The dynamic Bending Light (DBL) will operate when the headlamp is ON. To turn off the DBL, change the switch to other positions. After turning the DBL off, headlamp swiveling no longer occurs, but leveling operates continuously.

If the DBL malfunction indicator comes on, the DBL is not working properly. Drive to the nearest safe location and restart the engine. If the indicator continuously remains on, have your vehicle checked by an authorized Kia dealer as soon as possible.

Headlight leveling device
Automatic type To ensure the proper headlight beam is used under various conditions, the headlight beam levels are automatically adjusted depending on the number of passengers, the weight in the ...

Wipers and washers
A : Wiper speed control (front) · MIST – Single wipe · OFF – Off · INT – Intermittent wipe AUTO* – Auto control wipe · LO – Low wiper speed · HI – High wiper speed B : Interm ...

Other information:

Kia Stinger CK 2018-2025 Service Manual: Rear Differential Carrier


Components and components location Component 1. Drain plug 2. Differential case 3. Differential cover 4. Pinion drive gear 5. Pinion drive gear adjustment shim 6. Pinion rear bearing 7. Pinion bearing spacer 8. Pinion front bearing 9. Pi ...

Kia Stinger CK 2018-2025 Owners Manual: Emergency starting


Connect cables in numerical order and disconnect in reverse order. Jump starting Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm to yourself or damage to your vehicle or battery, follow these jump starting procedures. If in doubt, we strongly recommend that you h ...

Copyright © www.kstinger.com 2015-2025