Kia Stinger: Light bulb position (Side) / High mounted stop lamp (LED type) bulb replacement

If the high mounted stop lamp (LED) (1) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of an integrated unit. The LED lamps have to be replaced with the unit.
A skilled technician should check or repair the high mounted stop lamp (LED),
for it may damage related parts of the vehicle.
1. Open the liftgate.
2. Remove the service cover of both side (drive side and passenger side).
3. Remove the nuts from rear combination lamp of both side (drive side and passenger
side).
4 ...
If the license plate lamp (LED) (1) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of an in ...
Other information:
Components and components location
Components
1. Front seat belt retractor
2. Rear seat belt retractor [RH]
3. Rear center seat belt retractor
4. Rear seat belt retractor[LH]
5.Rear seat belt buckle
6. Emergency fastening device (EFD)
...
Repair procedures
Disassembly
In case of removing the high pressure fuel pump, high pressure fuel pipe,
delivery pipe, and injector, there may be injury caused by leakage of the
high pressure fuel. So don’t ...