Kia Stinger: Features of your vehicle / Hood

Kia Stinger CK 2018-2021 Owners Manual / Features of your vehicle / Hood

Opening the hood

1. Pull the release lever to unlatch the hood. The hood should pop open slightly.

Only open the hood with the vehicle on a flat surface, engine is turned off, shift lever placed in P (Park) position and setting the parking brake.

2. Go to the front of the vehicle, raise the hood slightly, push the secondary latch (1) left side of the hood center and lift the hood (2).

3. Raise the hood. It will completely rise by itself after it has been raised about halfway.

Hood open warning

The warning message will appear on the LCD display when hood is open.

The warning chime will operate when the vehicle is being driven at or above 3 km/h (2 mph) with the hood open.

Closing the hood

1. Before closing the hood, check the following:

2. Lower the hood halfway and push down to securely lock in place.

3. Check that the hood has engaged properly. If the hood can be raised slightly, it is not properly engaged.

Open it again and close it with a little more force.

CAUTION - Hood obstruction

Before closing the hood, ensure that all obstructions are removed from the hood opening. Closing the hood with an obstruction present in the hood opening may result in property damage.

WARNING - Fire risk

Do not leave gloves, rags or any other combustible material in the engine compartment. Doing so may cause a heat-induced fire.

WARNING - Unsecured engine hood

Always double check to be sure that the hood is firmly latched before driving away. If it is not latched, the hood could fly open while the vehicle is being driven, causing a total loss of visibility, which might result in an accident.

Power windows
The Engine Start/Stop Button must be in the ON position for power windows to operate. Each door has a power window switch that controls the door's window. The driver has a power window lock butto ...

Fuel filler lid
...

Other information:

Kia Stinger CK 2018-2021 Service Manual: Rear Glass Defogger Printed Heater


Repair procedures Inspection    • Wrap tin foil around the end of the voltmeter test lead to prevent damaging the heater line. Apply pressure on the tin foil with hand and move the t ...

Kia Stinger CK 2018-2021 Service Manual: Windshield Glass


Components and components location Components 1. Windshield glass 2. Windshield molding mounting bracket 3. Windshield glass side molding 4. Windshield glass upper molding Repair procedures Removal ...

Copyright © www.kstinger.com 2015-2021