Kia Stinger: Appearance care / Keep your vehicle clean

Kia Stinger CK 2018-2020 Owners Manual / Maintenance / Appearance care / Keep your vehicle clean

The best way to prevent corrosion is to keep your vehicle clean and free of corrosive materials. Attention to the underside of the vehicle is particularly important.

Keep your garage dry

Don't park your vehicle in a damp, poorly ventilated garage. This creates a favorable environment for corrosion. This is particularly true if you wash your vehicle in the garage or drive it into the garage when it is still wet or covered with snow, ice or mud. Even a heated garage can contribute to corrosion unless it is well ventilated so moisture is dispersed.

Keep paint and trim in good condition

Scratches or chips in the finish should be covered with "touch-up" paint as soon as possible to reduce the possibility of corrosion. If bare metal is showing through, the attention of a qualified body and paint shop is recommended.

Bird droppings : Bird droppings are highly corrosive and may damage painted surfaces in just a few hours. Always remove bird droppings as soon as possible.

Don't neglect the interior

Moisture can collect under the floor mats and carpeting and cause corrosion. Check under the mats periodically to be sure the carpeting is dry. Use particular care if you carry fertilizers, cleaning materials or chemicals in the vehicle.

These should be carried only in proper containers and any spills or leaks should be cleaned up, flushed with clean water and thoroughly dried.

Exterior care
Exterior general caution It is very important to follow the label directions when using any chemical cleaner or polish. Read all warning and caution statements that appear on the label. Finish mai ...

Interior care
Interior general precautions Prevent chemicals such as perfume, cosmetic oil, sun cream, hand cleaner, and air freshener from contacting the interior parts because they may cause damage or discol ...

Other information:

Kia Stinger CK 2018-2020 Service Manual: Roller Blind


Components and components location Components Location 1. Roller assembly Repair procedures Replacement    Put on gloves to protect your hands. ...

Kia Stinger CK 2018-2020 Service Manual: Blower Unit


Components and components location Components Location 1. Blower Unit Components 1. Inlet seal 2. Inlet duct case [Upper] 3. Inlet door assembly 4. Inlet case [Lower] 5. Air filter cover 6. Blower case [Upper] ...

Copyright © www.kstinger.com 2015-2020