Kia Stinger CK: Engine Mechanical System / Intake And Exhaust System

Contents:

Air Cleaner ➤

Intercooler ➤

Intake Manifold ➤

Turbocharger & Exhaust Manifold ➤

Muffler ➤

Other information:

Kia Stinger (CK) 2018-2023 Service Manual: Height Sensor

Components and components location Components Description and operation Description Height sensor sense a change of vehicle height and send this signal to AFS ECU. Height sensor is comprised of rotor/stator, PCB coil and sensor lever. Sensor check the lever angle value which is calculated by the magnetic field of stator.

Kia Stinger (CK) 2018-2023 Service Manual: Battery

Repair procedures Inspection Battery Voltage and Status Check the battery voltage and status using the battery tester. Battery Terminal 1. Move back and forth to check if the battery terminals (A) are loose or corroded. If the terminals are corroded, clean them. If battery positive connection is loose, disconnect ground(GND) cable first before attempting to remove or tighten plus connection, to prevent personal injury.

Categories

 
Copyright © 2026 www.kstinger.com 0.0092