Kia Stinger: Smart cruise control with stop & go system / To convert to cruise control mode
The driver may choose to only use the cruise control mode (speed control function)
by doing as follows:
1.Turn the smart cruise control system on (the cruise indicator light will be
on but the system will not be activated).
2.Push the distance to distance switch for more than 2 seconds.
3.Choose between "Smart cruise control (SCC) mode" and "Cruise control (CC) mode".
When using the cruise control mode, you must manually assess the distance to
other vehicles as the system will not automatically brake to slow down for other
vehicles.
When the system is canceled using the CRUISE button or the CRUISE button is used
after the engine is turned on, the Smart Cruise Control mode will turn on.
WARNING
When using the cruise control mode, you must manually assess the distance
to other vehicles as the system will not automatically brake to slow down for other
vehicles.
The sensitivity of vehicle speed when following the front vehicle to maintain
the set distance can be adjusted. Go to the User Settings Mode (Driver Assistance)
and select SCC (Smart Cruise Contro ...
The smart cruise control system may have limits to its ability to detect distance
to the vehicle ahead due to road and traffic conditions.
On curves
On curves, the smart cruise control system ...
Other information:
Components and components location
Component Location
1. Wide sunroof
2. Wide sunroof switch
3. Roller blind motor & slave
controller
4. Glass motor & controller
Schematic diagrams
Circuit Diagram
No. ...
The power steering uses a motor to assist you in steering the vehicle. If the
engine is off or if the power steering system becomes inoperative, the vehicle may
still be steered, but it will require increased steering effort.
The EPS is controlled by a power steering control unit which senses t ...