Contents:

This system is designed to provide protection from unauthorized entry into the vehicle. This system is operated in three stages: the first is the “Armed” stage, the second is the “Theft-alarm” stage, and the third is the “Disarmed” stage. If triggered, the system provides an audible alarm with blinking of the hazard warning lights.
Park the vehicle and stop the engine. Arm the system as described below.
1. Turn off the engine.
2. Make sure that all doors (and liftgate) and engine hood are closed and latched.
3. Lock the doors by depressing the door lock button on the smart key.
After completion of the steps above, the hazard warning lights will blink (for smart key, the chime also sounds) once to indicate that the system is armed.
If any door (or liftgate) or engine hood remains open, the hazard warning lights and the chime will not operate and the theft-alarm will not arm. If all doors and liftgate and engine hood are closed after the lock button is pressed, the hazard warning lights blink once.
The system can also be armed by locking the doors with the key from the front doors; however, the hazard warning lights will not blink using this method.
✽ NOTICE
The theft-alarm system can be deactivated by an authorized Kia dealer. If you want this feature, consult an authorized Kia dealer.
Do not arm the system until all passengers have left the vehicle. If the system is armed while a passenger( s) remains in the vehicle, the alarm may be activated when the remaining passenger(s) leave the vehicle. If any door (or liftgate) or engine hood is opened within 30 seconds after the system enters the armed stage, the system is disarmed to prevent an unnecessary alarm.
The alarm will be activated if any of the following occurs while the system is armed.
The horn will sound and the hazard warning lights will blink continuously for approximately 30 seconds, and repeat the horn 2 times unless the system is disarmed. To turn off the system, unlock the doors with the smart key.
The system will be disarmed when
• The doors (and liftgate) are unlocked with the smart key.
After depressing the unlock button, the hazard warning lights will blink and the chime will sound twice (in smart key) to indicate that the system is disarmed.
After depressing the unlock button, if any door (or liftgate) is not opened within 30 seconds, the system will be rearmed.
• Avoid trying to start the engine while the alarm is activated. The vehicle starting motor is disabled during the theft-alarm stage.
If the system is not disarmed with the smart key, open the doors by using the mechanical key and start the engine by directly pressing the engine Start/Stop button with the smart key.
• If you lose your keys, consult your authorized Kia dealer.
CAUTION - Adjusting alarm system
Do not change, alter or adjust the theft-alarm system because it could cause the theft-alarm system to malfunction.
✽ NOTICE
Malfunctions caused by improper alterations, adjustments or modifications to the theft-alarm system are not covered by your vehicle manufacturer warranty.
Kia Stinger (CK) 2018-2023 Owner's Manual: Cooling Fan
Components and components location Components [BLDC (Brushless DC) motor type] 1. Radiator 2. Cooling fan assembly 3. Reservoir tank [DC motor type] 1. Cooling fan 2. Cooling fan motor 3. Cooling fan shroud 4. Cooling fan controller 5. Reservoir tank Description and operation Description The cooling fan operates in 2 stages (HIGH/LOW).Kia Stinger (CK) 2018-2023 Owner's Manual: Vehicle load limit
Tire and loading information label The label located on the driver's door sill gives the original tire size, cold tire pressures recommended for your vehicle, the number of people that can be in your vehicle and vehicle capacity weight. Vehicle capacity weight: 410 kg (904 lbs.) Vehicle capacity weight is the maximum combined weight of occupants and cargo.