Kia Stinger: Features of your vehicle / Welcome system
Headlight (Headlamp) escort function
When the headlight(light switch in the headlight or AUTO position) is on and all doors (and liftgate) are locked and closed, the position light and headlight will come on for 15 seconds if any of the below is performed.
• With the smart key system
- When the door unlock button is pressed on the smart key.
At this time, if you press the door lock or unlock button, the position light and headlight will turn off immediately.
Interior light
When the interior light switch is in the DOOR position and all doors (and liftgate) are locked and closed, the room lamp will come on for 30 seconds if any of the below is performed.
• With the smart key system
- When the door unlock button is pressed on the smart key.
- When the button of the outside door handle is pressed.
At this time, if you press the door lock button, the lamps will turn off immediately. Pocket lamp (if equipped)
When all the doors (and liftgate) are locked and closed, the pocket lamp and puddle lamp will come on for about 15 seconds if any of the below is performed.
• With the smart key system
- When the vehicle is approached with the smart key in possession.
Door courtesy lamp
The door courtesy lamp comes ON when the door is opened to assist entering or
exiting the vehicle. It also serves as a warning to passing vehicles that the vehicle
door is open. ...
Defroster
CAUTION - Conductors
To prevent damage to the conductors bonded to the inside surface of the rear
window, never use sharp instruments or window cleaners containing abrasives to clean
the window.
...
Other information:
Kia Stinger CK 2018-2024 Owners Manual: BCW (Blind-Spot Collision Warning)
Operating conditions The indicator on the switch will illuminate when the Blind-Spot Collision Warning System (BCW) switch is pressed with the engine start/stop Button ON. If vehicle speed exceeds 30 km/h (20 mph), the system will activate. If you press the switch again, the switch indicator ...
Kia Stinger CK 2018-2024 Service Manual: Ambient Temperature Sensor
Description and operation Description Located in front of the condenser, the ambient temperature sensor detects the ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature. The sensor output ...
