Kia Stinger: Fuel filler lid / Closing the fuel filler lid
1. To install the cap, turn it clockwise until it “clicks” once. This indicates
that the cap is securely tightened.
2. Close the fuel filler lid and push it in lightly making sure that it is securely
closed.
✽ NOTICE
There may be an intermittent noise near the refueling hole while the engine
is idling if the fuel cap is not closed securely. This occurs normally with the
OBD system.
✽ NOTICE
When refueling on unlevel ground, the fuel gauge may not point to the F position.
It is not a malfunction. If you move your vehicle to a level ground, the fuel
gauge will move to the full position.
The fuel filler lid must be opened from inside the vehicle by pressing the fuel
filler lid opener button.
If the fuel filler lid does not open because ice has formed around it, tap lightly
or p ...
If the fuel filler lid does not open using the fuel filler lid opener button,
you can open it manually.
Remove the panel in the cargo area. Pull the handle out slightly.
CAUTION
Do not pull the ...
Other information:
❈ Left side : Normal , Right side : Blown
A vehicle’s electrical system is protected from electrical overload damage by
fuses.
This vehicle has 4 (or 5) fuse panels, one located in the driver’s side panel
bolster, the other in the engine compartment near the battery.
If any of your ve ...
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear pillar trim.
(Refer to Body - "Rear Pillar Trim")
3.
Disconnect the power tailgate spindle connector (A).
...