Kia Stinger CK: Special driving conditions / Highway driving

Kia Stinger (CK) 2018-2023 Owner's Manual / Driving your vehicle / Special driving conditions / Highway driving

Contents:

Tires
Fuel, engine coolant and engine oil
Drive belt

Tires

Adjust the tire inflation pressures to specification. Low tire inflation pressures will result in overheating and possible failure of the tires.

Avoid using worn or damaged tires which may result in reduced traction or tire failure.

Never exceed the maximum tire inflation pressure shown on the tires.

WARNING - Under/over inflated tires

Always check the tires for proper inflation before driving. Underinflated or overinflated tires can cause poor handling, loss of vehicle control, and sudden tire failure leading to accidents, injuries, and even death. For proper tire pressures, refer to “Tires and wheels” in chapter 8.

WARNING - Tire tread

Always check the tire tread before driving your vehicle. Worn-out tires can result in loss of vehicle control.Worn-out tires should be replaced as soon as possible. For further information and tread limits, refer to "Tires and wheels" in chapter 7.

Fuel, engine coolant and engine oil

High speed travel consumes more fuel than urban motoring. Do not forget to check both the engine coolant and engine oil.

Drive belt

A loose or damaged drive belt may result in overheating of the engine.

Special driving conditions

Winter driving

Other information:

Kia Stinger (CK) 2018-2023 Owner's Manual: Driver position memory system

Driver Position Memory System is the facility that enables driver’s seat, leg extension, steering wheel, exterior mirrors, cluster and head-up display (HUD) to be controlled with a simple button operation, which allows a driver to recall memorized driving positions and automatically control them. - Driver’s seat/Leg extension/Steering Wheel/Exterior mirrors: Location - Cluster: Brightness of lighting - Head Up Display (HUD): Height, rotation and brightness.

Kia Stinger (CK) 2018-2023 Owner's Manual: Shift Cable

Components and components location Components 1. Manual control lever 2. Shift cable 3. Shift lever assembly 4. Knob Repair procedures Removal 1. Shift the gear to "N". 2. Loosen the nut (A) and remove the shift cable fixing clip (B).