| Specification |
|
Item |
Resistance (Ω) |
|
Driver Airbag (DAB) |
1.7 - 2.3 |
|
Passenger Airbag (PAB) |
1.7 - 2.3 |
|
Side Airbag (SAB) |
1.8 - 2.4 |
|
Curtain Airbag (CAB) |
1.7 - 2.3 |
|
Seat Belt Pretensioner (BPT) |
1.7 - 2.3 |
|
Seat Belt Buckle Switch (BS) |
1.7 - 2.3 |
|
Emergency Fastening Device (EFD) |
1.7 - 2.3 |
| Tightening Torques |
|
Item |
N·m |
kgf·m |
lb·ft |
|
Passenger airbag (PAB) |
3.8 - 5.8 |
0.39 - 0.6 |
2.8 - 4.3 |
|
Curtain airbag (CAB) bolt |
7.7 - 11.7 |
0.79 - 1.2 |
5.7 - 8.6 |
|
Curtain airbag (CAB) nut |
3.8 - 5.8 |
0.39 - 0.6 |
2.8 - 4.3 |
|
Side airbag (SAB) |
5.8 - 7.8 |
0.6 - 0.8 |
4.3 - 5.7 |
|
Knee airbag (KAB) |
7.8 - 11.7 |
0.8 - 1.2 |
5.7 - 8.6 |
|
Seat belt anchor bolt (BPT) |
39.2 - 53.9 |
4.0 - 5.5 |
28.9 - 39.7 |
|
Emergency Fastening Device (EFD) |
39.2 - 53.9 |
4.0 - 5.5 |
28.9 - 39.7 |
|
SRS control module (SRSCM) |
9.4 - 13.5 |
0.96 - 1.38 |
6.9 - 9.9 |
|
Front impact sensor (FIS) |
7.8 - 11.7 |
0.8 - 1.2 |
5.7 - 8.6 |
|
Pressure side impact sensor (P-SIS) |
7.8 - 11.7 |
0.8 - 1.2 |
5.7 - 8.6 |
|
Gravity side impact sensor (G-SIS) |
2.9 - 3.9 |
0.3 - 0.4 |
2.1 - 2.8 |
|
Rear Gravity side impact sensor (R-SIS) |
7.8 - 11.7 |
0.8 - 1.2 |
5.7 - 8.6 |
Kia Stinger (CK) 2018-2023 Service Manual: Luggage Side Trim
Components and components location Component Location 1. Rear transverse trim Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remove interior trim pieces without marring the surface.Repair procedures Disassembly In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure fuel. So don’t do any repair work right after engine stops. • Use fender covers to avoid damaging painted surfaces.