| Service Data |
|
Items |
Specification |
|
|
Hood |
Type |
Rear hinged, gas lifter type |
|
Front Door |
Structure |
Front hinged, full door structure |
|
Regulator system |
Wire drum type |
|
|
Locking system |
Pin-fork system |
|
|
Rear Door |
Structure |
Front hinged, full door structure |
|
Regulator system |
Wire drum type |
|
|
Locking system |
Pin-fork system |
|
|
Trunk Lid |
Type |
Front hinged, power trunk lid type (option ) |
|
Seat Belts |
Front |
3-point type with Emergency Locking Retractor (E.L.R.) |
|
Rear |
3-point type with Emergency Locking Retractor (E.L.R.) |
|
| Tightening Torque |
|
Items |
N·m |
Kgf·m |
lb·ft |
|
|
Front and rear doors |
Door hinge to body |
37.3 - 41.2 |
3.8 - 4.2 |
27.5 - 30.4 |
|
Door hinge to door |
21.6 - 26.5 |
2.2 - 2.7 |
15.9 - 19.5 |
|
|
Door checker to door |
6.9 - 10.8 |
0.7 - 1.1 |
5.1 - 8.0 |
|
|
Door checker to body |
19.6 - 29.4 |
2.0 - 3.0 |
14.5 - 21.7 |
|
|
Outside handle base mounting bolt |
5.9 - 7.8 |
0.6 - 0.8 |
4.3 - 5.8 |
|
|
Door latch mounting bolts |
6.9 - 10.8 |
0.7 - 1.1 |
5.1 - 8.0 |
|
|
Door module mounting bolts |
7.8 - 11.8 |
0.8 - 1.2 |
5.8 - 8.7 |
|
|
Door glass mounting bolt |
7.8 - 11.8 |
0.8 - 1.2 |
5.8 - 8.7 |
|
|
Door striker mounting bolts |
18.7 - 21.6 |
1.7 - 2.2 |
12.3 - 15.9 |
|
|
Trunk Lid |
Trunk lid striker mounting bolts |
21.6 - 26.5 |
2.2 - 2.7 |
15.9 - 19.5 |
|
Trunk lid latch mounting bolts |
6.9 - 10.8 |
0.7 - 1.1 |
5.1 - 8.0 |
|
|
Trunk lid key holder mounting bolts |
6.9 - 10.8 |
0.7 - 1.1 |
5.1 - 8.0 |
|
|
Trunk lid hinge to trunk lid |
6.9 - 8.8 |
0.7 - 0.9 |
5.1 - 6.5 |
|
|
Hood |
Hood hinge to body |
21.6 - 26.5 |
2.2 - 2.7 |
15.9 - 19.5 |
|
Hood hinge to hood |
21.6 - 26.5 |
2.2 - 2.7 |
15.9 - 19.5 |
|
|
Hood latch to body |
7.8 - 11.8 |
0.8 - 1.2 |
5.8 - 8.7 |
|
|
Seat |
Front seat mounting bolts |
49.0 - 63.7 |
5.0 - 6.5 |
36.2 - 47.0 |
|
Rear seat back mounting bolts |
16.7 - 25.5 |
1.7 - 2.6 |
12.3 - 18.8 |
|
|
Rear seat frame mounting bolts |
16.7 - 25.5 |
1.7 - 2.6 |
12.3 - 18.8 |
|
|
Rear seat frame mounting nuts |
16.7 - 25.5 |
1.7 - 2.6 |
12.3 - 18.8 |
|
|
Seat belt |
Height adjuster mounting bolts |
39.2 - 53.9 |
4.0 - 5.5 |
28.9 - 39.8 |
|
Front seat belt upper anchor mounting bolt |
39.2 - 53.9 |
4.0 - 5.5 |
28.9 - 39.8 |
|
|
Front seat belt lower anchor mounting bolt |
39.2 - 53.9 |
4.0 - 5.5 |
28.9 - 39.8 |
|
|
Front seat belt pretensioner upper mounting bolt |
39.2 - 53.9 |
4.0 - 5.5 |
28.9 - 39.8 |
|
|
Front seat belt pretensioner lower mounting bolt |
7.8 - 11.8 |
0.8 - 1.2 |
5.8 - 8.7 |
|
|
Rear seat belt lower anchor mounting bolts |
39.2 - 53.9 |
4.0 - 5.5 |
28.9 - 39.8 |
|
|
Rear center seat belt retractor mounting bolt |
39.2 - 53.9 |
4.0 - 5.5 |
28.9 - 39.8 |
|
|
Rear seat belt retractor mounting bolt |
39.2 - 53.9 |
4.0 - 5.5 |
28.9 - 39.8 |
|
|
Seat belt buckle mounting bolt |
39.2 - 53.9 |
4.0 - 5.5 |
28.9 - 39.8 |
|
|
Outside rearview mirror |
Outside rearview mirror mounting nuts |
6.9 - 10.8 |
0.7 - 1.1 |
5.1 - 8.0 |
|
Wiper arm |
Wiper arm mounting nuts |
22.6 - 31.4 |
2.3 - 2.7 |
16.6 - 19.5 |
|
Quarter fixed glass |
Quarter fixed glass mounting nuts |
3.9 - 4.4 |
0.4 - 0.45 |
2.9 - 3.3 |
|
Panorama sunroof |
Panorama sunroof mounting nuts |
7.8 - 11.8 |
0.8 - 1.2 |
5.8 - 8.7 |
|
Panorama sunroof mounting bolts |
7.8 - 11.8 |
0.8 - 1.2 |
5.8 - 8.7 |
|
Kia Stinger (CK) 2018-2023 Service Manual: Climate Control Air Filter
Description and operation Description Located in the blower unit, the climate control air filter eliminates foreign materials and odor. The particle filter performs the roles of an odor filter as well as a conventional dust filter to ensure pleasant interior environment. Repair procedures Replacement 1. Remove the stopper (B) from the glove box (A).Kia Stinger (CK) 2018-2023 Service Manual: Rear Glass Defogger Switch
Repair procedures Inspection 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (KDS). The diagnostic system (KDS) provides the following information. (1) Self diagnosis : Checking failure and code number (DTC) (2) Current data : Checking the system input/output data state (3) Actuation test : Checking the system operation condition (4) Additional function : Controlling other features including system option setting and zero point adjustment 2.