Kia Stinger: What to do in an emergency / Road warning
Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme
caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are being made or when the vehicle
is stopped near the edge of a roadway.
Depress the flasher switch with the ignition switch in any position. The flasher
switch is located in the center facia panel. All turn signal lights will flash simultaneously.
- The hazard warning flasher operates whether your vehicle is running or not.
- The turn signals do not work when the hazard flasher is on.
- Care must be taken when using the hazard warning flasher while the vehicle
is being towed.
If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N
(Neutral) position and then push the vehicle to a safe place.
If you h ...
Other information:
Your vehicle is equipped with the emergency liftgate safety release lever located
on the bottom of the liftgate. When someone is inadvertently locked in the luggage
compartment, the liftgate can be opened by doing as follows:
1. Remove the cover.
2. Push the release lever to the right.
3. P ...
Your vehicle is equipped with an electronic engine immobilizer system to reduce
the risk of unauthorized vehicle use.
Whenever the ENGINE START/STOP button is changed to the ON position, the immobilizer
system checks and verifies if the key is valid or not.
If the key is valid, the engine will ...