Kia Stinger: Cruise control system / To set cruise control speed
1. Press the CRUISE button on the steering wheel to turn the system on. The CRUISE
indicator light in the instrument cluster will illuminate.
2. Accelerate to the desired speed, which must be more than 30 km/h (20 mph).
3. Move the lever down (to SET-), and release it at the desired speed.The cruise
indicator and set speed on the LCD screen will illuminate. Release the accelerator
at the same time. The desired speed will automatically be maintained.
On a steep grade, the vehicle may slow down slightly when driving uphill or speed
up slightly while going downhill.
The cruise control system allows you to program the vehicle to maintain a constant
speed without depressing the accelerator pedal.
This system is designed to function above approximately 30 km/h ...
Follow either of these procedures:
Move the lever up (to RES+) and hold it.Your vehicle will accelerate. Release
the lever at the speed you want.
Move the lever up (to RES+) and release it ...
Other information:
If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N
(Neutral) position and then push the vehicle to a safe place.
If you have a flat tire while driving
If a tire goes flat while you are driving:
1. Take your foot off the ...
Components and components location
Component Location
1. Crash pad lower panel
Repair procedures
Replacement
Put on gloves to protect your hands.
...