Kia Stinger: Features of your vehicle / Wipers and washers
![](images/wipers_and_washers-116/1/page_294.png)
A : Wiper speed control (front)
· MIST – Single wipe
· OFF – Off
· INT – Intermittent wipe
AUTO* – Auto control wipe
· LO – Low wiper speed
· HI – High wiper speed
B : Intermittent control wipe time adjustment
C :Wash with brief wipes (front)*
Dynamic Bending Light (DBL) uses the steering angle and vehicle speed, to keep
your field of vision wide by swiveling and leveling the headlamp.
Change the switch to the AUTO position when the en ...
Operates as follows when the ignition switch is turned ON.
MIST : For a single wiping cycle, move the lever to this (MIST) position and
release it. The wipers will operate continuously if the lever ...
Other information:
Repair procedures
Replacement
[LHD]
1.
Disconnect the battery negative cable.
2.
Turn the steering wheel so that the front wheels are facing straight
ahead.
3.
Remove the driver airbag.
(Refer to Restraint - " ...
1. Turn the ignition switch and all other switches off.
2. Open the fuse panel cover.
If the switch is located in the “OFF” position, a caution indicator will be displayed
in the cluster.
3. Pull the suspected fuse straight out. Use the removal tool provided on the
engine compartment ...