Kia Stinger: Around View Monitor (AVM) / Around View Monitor (AVM) Unit

Kia Stinger CK 2018-2024 Service Manual / Body Electrical System / Around View Monitor (AVM) / Around View Monitor (AVM) Unit

Components and components location

Components

Schematic diagrams

Circuit Diagram

Repair procedures

Removal

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Disconnect the negative (-) battery terminal.

2.	Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel")

3.	Remove the knee airbag (KAB) module. (Refer to Restraint - "Knee Airbag (KAB) Module")

4.	Disconnect the AVM unit connectors (A).

5.	Remove the AVM unit (A) after loosening the mounting nuts.

Installation

1.	Install the AVM unit.

2.	Connect the AVM unit connectors.

3.	Install the knee airbag (KAB) module.

4.	Install the crash pad lower panel.

5.	Connect the negative (-) battery terminal.

Around View Monitor (AVM)

Components and components location Components 1) AVM unit basically transmits data via C-CAN only. ...

Pantoscopic Camera

Components and components location Components Front View Camera Side View Camera Rear View Camera Repair procedures Removal ...

Other information:

Kia Stinger CK 2018-2024 Owners Manual: Instrument Cluster Control

Adjusting Instrument Cluster Illumination The brightness of the instrument panel illumination is changed by pressing the illumination control button (“+” or “-”) when the Engine Start/Stop button is ON, or the taillights are turned on. If you hold the illumination control button ...

Kia Stinger CK 2018-2024 Service Manual: Forward Collision-Avoidance Assist (FCA) System

Description and operation Description – The Forward Collision-Avoidance Assist (FCA) radar sends a signal to detect the vehicle in front, based on the calculated distance the FCA applies the brakes in order to avoid or lessen collision with the vehicle in front ...