Kia Stinger: Windshield defrosting and defogging / Automatic climate control system
To defog inside windshield
1. Set the fan speed to the desired position.
2. Select desired temperature.
3. Press the defroster button (
).
4. The outside (fresh) air position will be selected automatically and the air conditioning will turn on according to the detected ambient temperature.
If the air conditioning and outside (fresh) air position are not selected automatically,
adjust the corresponding button manually. If the
position is selected, lower fan speed
is adjusted to a higher fan speed.
To defrost outside windshield
1. Set the fan speed to the highest position.
2. Set the temperature to the extreme hot (HI) position.
3. Press the defroster button ().
4. The outside (fresh) air position will be selected automatically and the air conditioning will turn on according to the detected ambient temperature.
Windshield defrosting and defogging
WARNING - Windshield heating
Do not use the or
position during cooling operation
in extremely humid weather. The difference between the temperature of the outside
air and the windshield could ...
Defogging logic
To reduce the possibility of fogging up the inside of the windshield, the air
intake or air conditioning is controlled automatically according to certain conditions
such as or
position. To canc ...
Other information:
Kia Stinger CK 2018-2024 Service Manual: ECS-G Sensor
Repair procedures Removal [Body G Sensor] Front 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque: 107.9 - 127 ...
Kia Stinger CK 2018-2024 Service Manual: Power Tailgate Module
Components and components location Components No. Connector A Connector B Connector C 1 Power supply Cinching motor (+) Spindle motor (RH)_Close (-) 2 ...
