Kia Stinger: AVN System / AVN Front Monitor
Components and components location
Repair procedures
• |
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components.
|
• |
When removing the interior trim pieces, use a plastic panel removal
tool to prevent damaging the surface.
|
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad passenger side panel.
(Refer to Body - "Crash Pad Center Panel")
|
3. |
Remove the AVN front monitor (A) after loosening the mounting screws.
|
4. |
Disconnect the AVN front monitor connectors (A).
|
1. |
Connect the AVN front monitor connectors.
|
2. |
Install the AVN front monitor.
|
3. |
Install the crash pad passenger side panel.
|
4. |
Connect the negative (-) battery terminal.
|
Repair procedures
Inspection
Troubleshooting of the speakers
When handling the speakers :
...
Components and components location
Components
[Mobis]
Connector Pin Information
No.
Connector A
Connector B
1
...
Other information:
Repair procedures
Removal
1.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the engine room side cover.
D 2.2 R VGT (Refer to Engine Mechanical System - "Engine Room Under cover")
G 2.0 T-GDI THETA II (Refe ...
Components and components location
Component Location
1. Rear door module
Repair procedures
Replacement
Put on gloves to protect your hands.
...