Kia Stinger: Front Driveshaft Assembly / BJ Boot

Kia Stinger CK 2018-2024 Service Manual / Driveshaft and axle / Front Driveshaft Assembly / BJ Boot

Repair procedures

Replacement

1.	Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”)

2.	Remove the TJ joint assembly. (Refer to Driveshaft Assembly - “TJ Joint”)

3.	Using a plier or flat-tipped (-) screwdriver, remove the BJ boot bands (A).

4.	Remove the BJ boot.

Install in the reverse order of removal.

•	Do not disassemble the BJ assembly.

•	Special grease must be applied to the driveshaft joint. Do not substitute with another type of grease.

•	The boot band should be replaced with a new one.

6.	Check the front alignment. (Refer to Suspension System - "Alignment")

TJ Joint

Repair procedures Replacement • Special grease must be applied to the driveshaft joint. Do ...

Rear Driveshaft Assembly

Repair procedures Removal 1. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94. ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Positive Crankcase Ventilation (PCV) Valve

Description and operation Operation Principle Repair procedures Removal 1. Disconnect the PCV hose (A). 2. Remove the PCV valve (B). Inspection 1. Insert a thin stick (A) into the ...

Kia Stinger CK 2018-2024 Owners Manual: Smart cruise control with stop & go system

➀ Cruise indicator ➁ Set speed ➂ Vehicle-to-vehicle distance The smart cruise control system allows you to program the vehicle to maintain a constant speed and a predetermined distance to the vehicle ahead without depressing the accelerator or brake pedal. WARNING - Smart cruise cont ...