Kia Stinger: Blind-Spot Collision Warning (BCW) / Blind-Spot Collision Warning (BCW) Warning Lamp
Components and components location
1. Side repeater lamp
2. BCW Indicator
|
3. AVM Camera
4. Puddle lamp
|
Repair procedures
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove mirror (A) to the direction as shown in the picture using (-)
screw driver.
•
|
Protect mirror from removing tool with cloth (B) wrapped.
|
•
|
Be careful not to damage mirror and mirror housing during
removing process.
|
•
|
Apply force around the center of mirror because to apply
force the end of mirror will break it.
|
|
Be careful not to damage the fixing clips (A).
|
|
3. |
Disconnect the heater connectors (B) and BCW indicator connector (A)
from the mirror.
|
4. |
Remove the BCW indicator (A) from the mirror.
|
1. |
Install the BCW indicator.
|
2. |
Connect the heater connectors and BCW indicator connector.
|
4. |
Connect the negative (-) battery terminal.
|
1. |
Remove the outside rear view mirror.
(Refer to Body - "Outside Rear View Mirror")
|
2. |
Verify that the mirror operates properly as shown in the below table.
|
Schematic diagrams
Circuit Diagram
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash ...
Components and components location
Component Location
1. Integrated body control unit
(IBU)
2. Interior antenna 1
3. Interior antenna 2
4. Tailgate open swit ...
Other information:
Components and components location
Component Location
1. Hood latch release handle
Repair procedures
Replacement
1.
After loosening the mounting screw, remove the hood latch release handle
(A).
...
Components and components location
Components
1. Rear door trim panel
2. Rear door module
3. Rear door panel
4. Rear door fixed glass & weatherstrip
5. Rear door drive channel
6. Rear door side weatherstrip
7. Rear door body side weatherstrip
...