Kia Stinger: Heating, Ventilation And Air Conditioning / Blower

Auto Defogging Sensor (DATC only)

Description and operation Description Installed on the windshield glass, the auto defogging sensor judges and sends signal to blow out wind for defogging if moisture occurs. On receivi ...

Blower Unit

Components and components location Components Location 1. Blower Unit Components 1. Inlet seal 2. Inlet duct case [Upper] ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Blind-Spot Collision Warning (BCW) Radar Calibration

Repair procedures Inspection Correction Overview Need to calibrate the mounting angle of the BCW when a vehicle has a rear or a side collision with BCW system even just replacing a BCW bracket or BCW components. Check before Correction 1. When a failure code [C270 ...

Kia Stinger CK 2018-2024 Service Manual: Engine Room Under Cover

Repair procedures Removal and Installation Engine Room Front Under Cover. 1. Remove the engine room front under cover (A). Tightening torque : 7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft) 2. ...