Other information:
Kia Stinger (CK) 2018-2023 Service Manual: Vanity Lamp
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the vanity lamp (A) using a flat-tip screwdriver.
3.
Disconnect the vanity lamp connector (A).
Installation
1.
Connect the vanity lamp connector.
Kia Stinger (CK) 2018-2023 Service Manual: Battery
Repair procedures
Inspection
Battery Voltage and
Status
Check the battery voltage and status using the battery tester.
Battery Terminal
1.
Move back and forth to check if the battery terminals (A) are loose or
corroded. If the terminals are corroded, clean them.
If battery positive connection is loose, disconnect ground(GND) cable
first before attempting to remove or tighten plus connection, to prevent
personal injury.