Kia Stinger: Brake System / Brake Line
Components and components location
Repair procedures
1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable.
|
2. |
Remove the brake fluid from the master cylinder reservoir with a syringe.
Do not spill brake fluid on the vehicle as it may damage the
paint. If brake fluid comes in contact with the paint, wash off
immediately with water.
|
|
3. |
Remove wheel nuts, front/rear wheel and tire (A) from front/rear hub.
Tightening torque:
107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft)
|
Be careful not to damage the hub bolts when removing the front/rear
wheel and tire.
|
[Front]
|
4. |
Loosen the flare nut (A) and then disconnect the tube.
|
5. |
Disconnect the brake hose clip (B).
Tightening torque :
13.7 - 16.7 N·m (1.4 - 1.7 kgf·m , 10.1 - 12.3 lb·ft)
|
[Rear]
|
6. |
Loosen the flare nut (A) and then disconnect the tube.
|
7. |
Disconnect the brake hose clip (B).
Tightening torque :
13.7 - 16.7 N·m (1.4 - 1.7 kgf·m , 10.1 - 12.3 lb·ft)
|
|
8. |
Loosen the front/rear brake cailiper hose bolt (A).
Tightening torque :
24.5 - 29.4 N·m (2.5 - 3.0 kgf·m , 18.1 - 21.7 lb·ft)
|
|
1. |
Check the brake tubes for cracks, crimps and corrosion.
|
2. |
Check the brake hoses for cracks, damage and fluid leakage.
|
3. |
Check the brake tube flare nuts for damage and fluid leakage.
|
4. |
Check brake hose mounting bracket for crack or deformation.
|
1. |
Install in the reverse order of removal.
Use a new washer (A) whenever installing.
[Front/Rear]
|
|
2. |
After installation, bleed the brake system.
(Refer to Brake system - "Brake Bleeding Procedures")
|
3. |
Check the spilled brake oil.
|
Components and components location
Components
1. Master cylinder
2. Brake booster
3. Brake reservoir
Repair procedures
Removal
[LHD]
...
Components and components location
Components
1. Brake lamp switch
2. Brake pedal
Repair procedures
Removal
[LHD]
1.
Turn i ...
Other information:
Special service tools
Special Service Tools
Tool (Number and name)
Illustration
Use
09880-4F000
Hog ring clip installer
Hog ring clip installation
0K888-D42000
EFD quick connenc ...
Specifications
Specifications
Smart Key Unit
Items
Specification
Rated voltage
DC 12 V
Operating voltage
DC 9 - 16 V
Operating temperature
-40 - 176°F (-40 - 80°C)
...