Kia Stinger: Interior Trim / Center Pillar Trim

Kia Stinger CK 2018-2024 Service Manual / Front Seat Belt / Interior Trim / Center Pillar Trim

Components and components location

Component Location

1. Center pillar lower trim

2. Center pillar upper trim

Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the front door scuff trim (A) by using a remover.

2.	Separate the rear seat cushion (A) after loosening the mounting bolts.

3.	Remove the rear seat cushion after disconnecting the heater connector (A).

4.	Remove the rear back side seat (A) by pulling it up after loosening the mounting bolts.

5.	Remove the rear door scuff trim (A) after removing the mounting clip.

6.	Remove the seat belt (B) from the EFD system (A) by using the SST (0K888-D4200).

7.	Remove the center pillar lower trim (A).

8.	Remove the center pillar upper trim (A).

Install in the reverse order of removal.

Replace any damage clips.

Front Pillar Trim

Components and components location Component Location 1. Front pillar trim Repair procedures Replacement ...

Rear Pillar Trim

Components and components location Component Location 1. Rear pillar trim Repair procedures Replacement ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Fuel Filler Door

Components and components location Component Location 1. Fuel filler door open switch 2. Fuel filler door release actuator ...

Kia Stinger CK 2018-2024 Service Manual: TPMS Receiver

Description and operation Operation 1. General Function • Auto-learn takes place only once per Ignition cycle. • On successful completion, 4 road wheel sensor ID's are latched into memory ...