Kia Stinger: ISG (Idle Stop and Go) system / Condition of ISG system operation
The ISG system will operate under the following condition:
- The driver’s seat belt is fastened.
- The driver’s door and engine hood are closed.
- The brake vacuum pressure is adequate.
- The battery is sufficiently charged.
- The outside temperature is between 14°F to 95°F (-10°C to 35°C).
- The engine coolant temperature is not too low.
✽ NOTICE
- If the ISG system does not meet the operation condition, the ISG system
is deactivated. The light on the ISG OFF button will illuminate and a message
“Auto Stop conditions not met” will appear on the LCD display.
- If the light or notice comes on continuously, please check the operation
condition.
To restart the engine from idle stop mode
Release the brake pedal. or
Move the shift gear to the R (Reverse) position or the manual mode while
depressing the brake pedal.
The engine will ...
If you wish to deactivate the ISG system, press the ISG OFF button (1).
The light on the ISG OFF button will illuminate.
If you press the ISG OFF button again, the system will be activated a ...
Other information:
Description and operation
Description
The primary purpose of the SRSCM (Supplemental Restraints System Control Module)
is to discriminate between an event that warrants restraint system deployment and
an event that does not. The SRSCM must decide whether to deploy the restraint sys ...
In order for the FCA system to operate properly, always make sure the sensor
or sensor cover is clean and free of dirt, snow, and debris. Dirt, snow, or foreign
substances on the lens may adversely affect the sensing performance of the sensor.
✽ NOTICE
Do not install any accessories, ...