Kia Stinger: Body (Interior and Exterior) / Cowl Top Cover

Kia Stinger CK 2018-2025 Service Manual / Body (Interior and Exterior) / Cowl Top Cover

Components and components location
Component Location

1. Cowl top cover


Repair procedures
Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Take care not to bend or scratch the trim and panels.

1.

Remove the reservoir cover (A) after removing the mounting cilps.

2.

Remove the cap (A) and then loosen the nuts (B).

Tightening torque :

22.6 - 26.5 N·m (2.3 - 2.7 Kgf·m, 16.6 - 19.5 lb·ft)

3.

Remove the wiper arm (A).

4.

Disconnect the nozzle hose (A).

5.

Detach the clips, then remove the cowl top cover (A).

6.

Install in the reverse order of removal.

  

Replace any damaged clips.

Side Sill Molding
Repair procedures Replacement    Put on gloves to protect your hands.  &nbs ...

Crash Pad
Components and components location Components 1. Cowl cross member bar 2. Main wiring 3. Main crash pad 4. Side air vent duct [RH] 5. Crash pad under cover [ ...

Other information:

Kia Stinger CK 2018-2025 Owners Manual: Wiper blades


Blade inspection Commercial hot waxes applied by automatic car washes have been known to make the windshield difficult to clean. Contamination of either the windshield or the wiper blades with foreign matter can reduce the effectiveness of the windshield wipers. Common sources of contaminati ...

Kia Stinger CK 2018-2025 Owners Manual: Automatic transmission operation


The automatic transmission has 8 forward speeds and one reverse speed. The individual speeds are selected automatically, depending on the position of the shift lever. ✽ NOTICE The first few shifts on a new vehicle, if the battery has been disconnected, may be somewhat abrupt. This is a norma ...

Copyright © www.kstinger.com 2015-2025