Kia Stinger: Drive Belt System / Crankshaft Damper Pulley

Kia Stinger CK 2018-2024 Service Manual / Engine Mechanical System / Drive Belt System / Crankshaft Damper Pulley

Repair procedures

Removal

1.	Remove the engine room front under cover. (Refer to Engine and Transmission Assembly - "Engine Room Under Cover")

2.	Remove the drive belt and water pump belt. (Refer to Drive Belt System - "Drive Belt")

3.	Install the SST (0K231-2C100) on the crankshatf damper pulley, and then tighten the bolts (A).

Install the SSTs (09231-2J210, 09231-D2100) on the SST (0K231-2C100) and then unfasten the crankshaft damper pulley mounting bolt.

•	Inset a adapter 5 mm (0.1969 in.) + 20 mm (0.7874 in.) of SST (09231-D2100) between SST (09231-2J210) and SST (0K231-2C100). And then tighten bolts 45 mm (1.7717 in.) of SST (09231-D2100)

•	When unfasten the crankshaft damper pulley mounting bolt, fix the SST 09231-2J210 on the sub frame.

5.	Remove the crankshaft damper pulley (A).

Installation

1.	Install the crankshaft damper pulley (A).

2.	Install the SST (0K231-2C100) on the crankshatf damper pulley, and then tighten the bolts (A).

Install the SSTs (09231-2J210, 09231-D2100) on the SST (0K231-2C100) and then tighten the crankshaft damper pulley mounting bolt.

•	Inset a adapter 5 mm (0.1969 in.) + 20 mm (0.7874 in.) of SST (09231-D2100) between SST (09231-2J210) and SST (0K231-2C100). And then tighten bolts 45 mm (1.7717 in.) of SST (09231-D2100)

•	When tighten the crankshaft damper pulley mounting bolt, fix the SST 09231-2J210 on the sub frame.

4.	Remove the SSTs (09231-2J210, 09231-D2100, 0K231-2C100) from the crankshaft damper pulley.

5.	Install the water pump belt and drive belt. (Refer to Drive Belt System - "Drive Belt")

6.	Install the engine room front under cover. (Refer to Engine and Transmission Assembly - "Engine Room Under Cover")

Drive Belt Tensioner

Repair procedures Removal and Installation 1. Remove the drive belt. (Refer to Drive Belt System - "Drive Belt") 2. Remove the dri ...

Engine And Transmission Assembly

...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Rear Assist Arm

Repair procedures Removal 1. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...

Kia Stinger CK 2018-2024 Owners Manual: Explanation of scheduled maintenance items

Engine oil and filter The engine oil and filter should be changed at the intervals specified in the maintenance schedule. If the vehicle is being driven in severe conditions, more frequent oil and filter changes are required. Drive belts Inspect all drive belts for evidence of cuts, cracks, e ...