Kia Stinger: Crash Pad / Crash Pad Lower Panel

Kia Stinger CK 2018-2024 Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Lower Panel

Components and components location

Component Location

1. Crash pad lower panel

Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the crash pad side cover [LH] (A) by using a remover.

2.	Separate the crash pad lower panel (A) after loosening the bolts and screws.

3.	Disconnect the crash pad lower switch connector (A).

Install in the reverse order of removal.

•	Make sure the connector are connected in properly.

•	Replace any damaged clips.

Center Fascia Panel

Components and components location Component Location 1. Monitor fascia panel Repair procedures Replacement &n ...

Steering Column Shroud Panel

Components and components location Component Location 1. Steering column shroud upper panel 2.Steering column shroud lower panel Repair procedu ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Hood switch

Description and operation Description Hood switch is one of the factors influencing the activation of the ISG function. When the hood is open, the engine will not start or stop by the ISG function for safety reasons. Repair procedures Replacement Hood Switch Inspe ...

Kia Stinger CK 2018-2024 Service Manual: AVN System

Components and components location Component Location 1 . AVN head unit 2. AVN front monitor 3. External amplifier 4. Multimedia jack 5 . Steering wheel remote control(SWRC) 6 . Hands-free mic 7 . Roof antenna(Radio + GPS + DAB) ...