Kia Stinger: Interior Trim / Door Scuff Trim
Components and components location
1. Front door scuff trim
|
2. Rear door scuff trim
|
Repair procedures
Put on gloves to protect your hands.
|
• |
Use a plastic panel removal tool to remove interior trim pieces
without marring the surface.
|
• |
Take care not to bend or scratch the trim and panels.
|
|
[Front Door Scuff Trim]
1. |
Remove the front door scuff trim (A) by using a remover.
|
2. |
Install in the reverse order of removal.
Replace any damage clips.
|
|
[Rear Door Scuff Trim]
1. |
Separate the rear seat cushion (A) after loosening the mounting bolts.
|
2. |
Remove the rear seat cushion after disconnecting the heater connector
(A).
|
3. |
Remove the rear back side seat (A) by pulling it up after loosening the
mounting bolts.
|
4. |
Remove the rear door scuff trim (A) after removing the mounting clip.
|
5. |
Install in the reverse order of removal.
Replace any damage clips.
|
|
Components and components location
Components
1. Front pillar trim
2. Center pillar upper trim
3. Rear pillar trim
4. Cowl side trim
5. Front door scuff trim ...
Components and components location
Component Location
1. Cowl side trim
Repair procedures
Replacement
&n ...
Other information:
Components and components location
Component Location
1. Front door module
Repair procedures
Front Door Module
Put on gloves to protect your hands.
...
Specifications
Specification
▷AGM80L - DIN
Item
Specification
Capacity [20 hr / 5 hr] (AH)
80 / 64
Cold Cranking Amperage (A)
800 (SAE) / 800 (EN)
Reserve Capacity (Min)
...