Kia Stinger: Power Train / Drive Belt

Kia Stinger CK 2018-2024 Service Manual / Maintenance / Power Train / Drive Belt

Repair procedures

Inspection

Check belt for maintenance and abnormal wear of V-ribbed part. Replace if necessary.

•	Do not bend, twist or turn the drive belt inside out.

•	Do not allow the drive belt to come into contact with oil, water and steam.

Visually check the belt for excessive wear, frayed cords etc.

If any defect has been found, replace the drive belt.

Cracks on the rib side of a belt are considered acceptable. If the belt has chunks missing from the ribs, it should be replaced.

Cooling System

Repair procedures Inspection Radiator hoses 1. Check radiator hoses for the following (1) Improper attachment (2) ...

Engine Oil and Filter

Repair procedures Inspection [Theta-II 2.0 T-GDI / Lambda-II 3.3 T-GDI] Engine Oil Level Be sure that the vehicl ...

Other information:

Kia Stinger CK 2018-2024 Owners Manual: RCCW (Rear Cross-Traffic Collision Warning)

When your vehicle moves backwards from a parking position, the sensor detects approaching vehicles to the left or right side direction and gives information to the driver. Operating conditions Select RCCW (Rear Cross-Traffic Collision Warning) in “User Settings” under “Driver Ass ...

Kia Stinger CK 2018-2024 Service Manual: Hood Weatherstrip

Repair procedures Replacement 1. Detach the clip and then remove the hood weatherstrip (A). Be careful not to scratch the hood weatherstrip. ...