Kia Stinger: Cylinder Block / Drive Plate

Kia Stinger CK 2018-2024 Service Manual / Engine Mechanical System / Cylinder Block / Drive Plate

Repair procedures

Removal and Installation

1.	Remove the automatic transmission. (Refer to Automatic Transmission System - "Automatic Transmission")

Remove the drive plate adapter (A) and drive plate (B).

Tightening torque :

117.7 - 127.5 N·m (12 - 13 kg·m, 86.8 - 94.0 lb·ft)

•	Always use new drive plate bolts.

•	Install and uniformly tighten the 7 bolts, in several passes.

3.	Install in the reverse order of removal.

Water Jacket Separator

Repair procedures Removal and Installation 1. Remove the cylinder head. (Refer to Cylinder Head Assembly - "Cylinder Head") 2. Remove ...

Rear Oil Seal

Repair procedures Replacement 1. Remove the automatic transmission. (Refer to Automatic Transmission System - "Automatic Transmission") 2. ...

Other information:

Kia Stinger CK 2018-2024 Owners Manual: Side air bag

❈ The actual air bags in the vehicle may differ from the illustration. Your vehicle is equipped with a side air bag in each front seat. The purpose of the air bag is to provide the vehicle's driver and/or the front passenger with additional protection than that offered by the seat belt al ...

Kia Stinger CK 2018-2024 Owners Manual: Resetting the sunroof

Whenever the vehicle battery is disconnected or discharged, you must reset your sunroof system as follows: 1.Start the engine. 2.Close the sunshade and sunroof completely if opened. 3.Release the sunroof control lever. 4.Push the sunroof control lever forward in the direction of close (about 1 ...