Kia Stinger: ECS(Electronic Control Suspension) System / ECS Control Unit

Kia Stinger CK 2018-2024 Service Manual / Suspension System / ECS(Electronic Control Suspension) System / ECS Control Unit

Repair procedures

Removal

1.	Turn ignition switch OFF and disconnect the negative (-) battery cable.

2.	Remove the luggage side trim. (Refer to Body - "Luggage side trim")

3.	Disconnect the ECS control unit connector (A).

4.	Loosen the ECS control unit bracket nut and then remove the ECS control unit (A).

Installation

1.	Install in the reverse order of removal.

2.	Perform ECS variant coding.

ECS(Electronic Control Suspension) System

Components and components location Components 1. ECS ECU 2. Front ECS Damper 3. Wheel speed sensor 4. Rear ECS Damper 5. Body G Sensor Descr ...

ECS-G Sensor

Repair procedures Removal [Body G Sensor] Front 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remo ...

Other information:

Kia Stinger CK 2018-2024 Owners Manual: Driver's and passenger's front air bag

■ Driver’s front air bag ■ Driver’s knee air bag ■ Passenger’s front air bag Your vehicle is equipped with an Advanced Supplemental Restraint (Air Bag) System and lap/shoulder belts at both the driver and passenger seating position. The indication of the system's presence are ...

Kia Stinger CK 2018-2024 Owners Manual: Parking

Always come to a complete stop and continue to depress the brake pedal. Move the shift lever into the P (Park) position, apply the parking brake, and place the engine start/stop button in the OFF position. Take the Key with you when exiting the vehicle. WARNING Do not depress the accelera ...