Kia Stinger: Hydraulic System / Electronic Oil Pump (EOP)

Kia Stinger CK 2018-2024 Service Manual / Automatic Transmission System / Hydraulic System / Electronic Oil Pump (EOP)

Components and components location

Components Location

1. Electric Oil Pump (EOP)

Schematic diagrams

Circuit Diagram

Repair procedures

Removal

1.	Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover")

Disconnect the EOP connector (A) and remove the EOP (B) by loosening the bolts.

Tightening torque :

19.6 - 25.5 N·m (2.0 - 2.6 kgf·m, 14.5 - 18.8 lb·ft)

Installation

Install in the reverse order of removal.

•	Check the assembled state of o-ring (A) and pipe seal (B) before reinstalling the EOP.

•	When replacing the EOP, the existing pipe seal (B) must be replaced with a new one.

2.	Refill the automatic transmission with fluid. (Refer to Hydraulic System - "Fluid")

Oil Pump Unit (OPU)

Components and components location Components Location 1. Oil Pump Unit (OPU) 2. OPU bracket Schematic diagrams Circuit Diagram Repair ...

Oil Cooler

Components and components location Components 1. Oil cooler tube 2. Oil cooler pipe 3. Oil cooler valve 4. Oil cooler Repair procedures ...

Other information:

Kia Stinger CK 2018-2024 Owners Manual: ISG (Idle Stop and Go) system

Your vehicle may be equipped with the ISG system, which reduces fuel consumption by automatically shutting down the engine, when the vehicle is at a standstill. (For example : red light, stop sign and traffic jam) The engine starts automatically as soon as the starting conditions are met. The ...

Kia Stinger CK 2018-2024 Service Manual: Audio Unit

Components and components location Components Connector Pin Information No. Connector A Connector B Connector C Connector D 1 Rear door left speaker (+) ⁻ ⁻ ...