Kia Stinger: ESP(Electronic Stability Program) System / ESP OFF Switch

Kia Stinger CK 2018-2024 Service Manual / Brake System / ESP(Electronic Stability Program) System / ESP OFF Switch

Description and operation

Description

1.	The ESP OFF switch is for the user to turn off the ESP system.

2.	The ESP OFF lamp is on when ESP OFF switch is engaged.

Repair procedures

Removal

1.	Turn ignition switch OFF and disconnect the negative (-) battery cable.

2.	Using the remover, remove the console upper cover (A).

3.	Disconnect the connector (A) from the console upper complete.

4.	Disconnect the connector (A) from the upper console.

5.	Loosen the screw and then remove the console floor switch complete (A).

6.	Remove the cup holder (A).

7.	Loosen the screw and then remove the ESP switch (A).

8.	Disconnec the ESP connector (A) from the upper console.

9.	Install in the reverse order of removal.

Rear Wheel Speed Sensor

Repair procedures Removal [NON ECS] 1. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque : 107.9 - 127.5 N·m (11.0 ...

Steering Angle Sensor

Description and operation Description Steering Wheel Angle Sensor detects rotating direction of the vehicle.The rotating direction detected by the sensor is sent to the HECU as CAN sig ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Rear Wheel Speed Sensor

Repair procedures Removal [NON ECS] 1. Remove wheel nuts, wheel and tire (A) from hub. Tightening torque : 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) ...

Kia Stinger CK 2018-2024 Owners Manual: In case of an emergency while driving

If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. If you have a flat tire while driving If a tire goes flat while you are driving: 1. Take your foot off the ...