Kia Stinger: Emission Control System / Exhaust Emission Control System

Kia Stinger CK 2018-2025 Service Manual / Emission Control System / Exhaust Emission Control System

Description and operation

Description

Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components.

Modifications to the combustion chamber, intake manifold, camshaft and ignition system form the basic control system.

These items have been integrated into a highly effective system which controls exhaust emissions while maintaining good drivability and fuel economy.

Fuel Tank Air Filter

Repair procedures Removal 1. Switch "OFF" the ignition and disconnect the negative (-) battery terminal. 2. Remove the rear-left whe ...

Catalytic Converter

Description and operation Description The catalytic converter of the gasoline engine is a three way catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen fr ...

Other information:

Kia Stinger CK 2018-2025 Service Manual: Rear Seat Assembly

Components and components location Component Location 1. Rear seat cushion assembly 2. Rear back side seat assembly [LH] 3. Rear seat back assembly 4. Rear back side seat assembly [RH] Repair procedures Replacement ...

Kia Stinger CK 2018-2025 Service Manual: Forward Collision-Avoidance Assist (FCA) System

Description and operation Description – The Forward Collision-Avoidance Assist (FCA) radar sends a signal to detect the vehicle in front, based on the calculated distance the FCA applies the brakes in order to avoid or lessen collision with the vehicle in front ...