Kia Stinger: Fuel Delivery System / Filler-Neck Assembly
Repair procedures
1. |
Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
|
2. |
Remove the fuel filler cap after opening the fuel filler door.
|
4. |
Remove the rear-left wheel & tire and wheel house cover.
|
5. |
Disconnect the fuel filler hose (A) and leveling hose (B).
|
6. |
Disconnect the ventilation (A).
|
7. |
Remove the filler-neck assembly from the vehicle after removing bracket
mounting nuts (A).
|
1. |
Install in the reverse order of removal.
|
Repair procedures
Removal
Low Pressure Fuel Line
[Engine Room <-> Extension Fuel Line]
1.
Release the residual pressure in fuel line.
(Refer to the Fuel Deliver ...
Repair procedures
Removal
1.
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - "Release Residual Pressure in Fuel
Line")
...
Other information:
Components and components location
Components Location
1. HECU module
2. Front wheel speed sensor (2WD)
3. Front wheel speed sensor (AWD)
4. Rear wheel speed sensor
Description and operation
Description of ESP
Electronic Stabil ...
Components and components location
Components Location
1. Battery
sensor
2. Brake Booster Vacuum Pressure Sensor (BBVPS)
3. AGM battery
4. DC/DC Converter [200W]
5. DC/DC Converter [400W]
6. ISG OFF Switch
7. Alternator
8. Starter ...