Kia Stinger: Front Door / Front Door Belt Inside Weatherstrip

Kia Stinger CK 2018-2024 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Belt Inside Weatherstrip

Repair procedures
Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Take care not to bend or scratch the trim and panels.

1.

Remove the front door trim.

(Refer to Front Door - "Front Door Trim")

2.

Remove the front door belt inside weatherstrip (A).

3.

Install in the reverse order of removal.

  

Make sure the connector is connected properly.

Make sure the door locks/unlocks and opens/closes properly.

Replace any damaged clips.

Front Door Belt Outside Weatherstrip
Repair procedures Replacement    Put on gloves to protect your hands.  &nbs ...

Front Door Side Weatherstrip
Repair procedures Replacement 1. Loosen the front door checker (A) mounting bolt. Tightening torque : 19.6 - 29.4 N·m (2.0 - 3.0 Kgf·m, 14.5 - ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Door Scuff Trim


Components and components location Component Location 1. Front door scuff trim 2. Rear door scuff trim Repair procedures Replacement    Put on gloves to protect your hands ...

Kia Stinger CK 2018-2024 Service Manual: Quarter Fixed Glass


Components and components location Components Location 1. Quarter fixed glass Repair procedures Replacement    Put on gloves to protect your hands. ...

Copyright © www.kstinger.com 2015-2024