Kia Stinger: Front Door / Front Door Belt Outside Weatherstrip

Kia Stinger CK 2018-2024 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Belt Outside Weatherstrip

Repair procedures

Replacement

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver or using a prying trim tool, wrap protective tap around the tool and related parts to prevent damage.

•	Be careful not to scratch the door trim and other parts.

1.	Pull down front door window glass by pressing the power window glass switch.

2.	Remove the front door trim. (Refer to Front Door - "Front Door Trim")

3.	Remove the front door frame inner cover (A) by using a remover.

4.	Remove the front door quadrant inner cover (B) after loosening the mounting screws (A).

5.	Remove the front door belt inside weatherstrip (A).

Install in the reverse order of removal.

•	Make sure the connector is connected properly.

•	Make sure the door locks/unlocks and opens/closes properly.

•	Replace any damaged clips.

Front Door Outside Handle

Components and components location Component Location 1. Front door outside handle Repair procedures Replacement ...

Front Door Belt Inside Weatherstrip

Repair procedures Replacement Put on gloves to protect your hands. &nbs ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Electric Thermostat (ECT)

Repair procedures Removal and Installation Removal of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. Do not remove the thermostat, even if the engine tends to overheat. ...

Kia Stinger CK 2018-2024 Owners Manual: To set cruise control speed

1. Press the CRUISE button on the steering wheel to turn the system on. The CRUISE indicator light in the instrument cluster will illuminate. 2. Accelerate to the desired speed, which must be more than 30 km/h (20 mph). 3. Move the lever down (to SET-), and release it at the desired speed.Th ...