Kia Stinger: Front Door / Front Door Inside Handle

Kia Stinger CK 2018-2025 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Inside Handle

Repair procedures

Replacement

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver or using a prying trim tool, wrap protective tap around the tool and related parts to prevent damage.

•	Be careful not to scratch the door trim and other parts.

1.	Remove the front door trim. (Refer to Front Door - "Front Door Trim")

2.	Remove the front door inside handle bracket (A) after loosening the mounting screws.

3.	Remove the front door inside handle (A) after loosening mounting screws.

Install in the reverse order of removal.

•	Make sure that the door locks/unlocks and opens/closes properly.

•	Replace any damaged clips.

Front Door Trim

Components and components location Component Location 1. Front door trim Repair procedures Replacement & ...

Front Door Window Glass

Components and components location Component Location 1. Front door window glass Repair procedures Replacement ...

Other information:

Kia Stinger CK 2018-2025 Service Manual: Temperature Control Actuator

Description and operation Description The heater unit consists of mode control actuator and temperature control actuator. Located in the heater unit, the temperature control actuator regulates the temperature in the following procedures. Signal from control unit adjusts the posi ...

Kia Stinger CK 2018-2025 Service Manual: Fuel Sender Assembly

Repair procedures Removal Main fuel sender cannot be replaced on its own; it should be replaced with the fuel pump assembly. (Refer to Fuel Delivery System - "Low Pressure Fuel Pump") ...