Kia Stinger: Front Door / Front Door Trim

Kia Stinger CK 2018-2024 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Trim

Components and components location

Component Location

1. Front door trim

Repair procedures

Replacement

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver or using a prying trim tool, wrap protective tap around the tool and related parts to prevent damage.

•	Be careful not to scratch the door trim and other parts.

1.	Remove the front door inside handle cap (A) by using a remover.

2.	Remove the front door inside pull handle cap (A) by using a remover.

3.	Seperate the front door inside pull handle mounting cap (A).

4.	Remover the front door trim (A) after loosening the mounting screws.

5.	Remove the front door inside handle cage (A).

6.	Disconnect the front door intergration connector (A).

Install in the reverse order of removal.

•	Make sure that the connector is connected properly.

•	Make sure that the door locks/unlocks and opens/closes properly.

•	Replace any damaged clips.

Front Door

Components and components location Components 1. Front door trim panel 2. Front door module 3. Front door panel 4. Front door channel 5. Front door side wea ...

Front Door Inside Handle

Repair procedures Replacement Put on gloves to protect your hands. &nb ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Mechanism Assembly

Repair procedures Replacement Put on gloves to protect your hands. • Use a plastic panel removal tool to remov ...

Kia Stinger CK 2018-2024 Service Manual: Barometric Pressure Sensor (BPS)

Specifications Specification Item Specification Output Voltage (V) 5 Pressure (KPa) 32.5 - 284 Operating Voltage (V) 4.5 - 5.5 Pressure [kPa ...