Kia Stinger: Front Door / Front Door Window Glass

Kia Stinger CK 2018-2024 Service Manual / Body (Interior and Exterior) / Front Door / Front Door Window Glass

Components and components location

Component Location

1. Front door window glass

Repair procedures

Replacement

Put on gloves to protect your hands.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the front door trim. (Refer to Front Door - "Front Door Trim")

2.	Remove the front door frame inner cover (A) by using a remover.

3.	Remove the front door belt inside weatherstrip (A).

4.	Remove the front door window glass mounting hole plug (A) from the door module.

By operating the power window switch, pull down until the glass mounting bolt on plug hole is visible.

Be careful not to damage the glass surface.

Loosen the mounting bolt and then pull out the front door window glass (A) by tilting it sideways.

Tightening torque :

7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)

Install in the reverse order of removal.

•	Check that glass operation is normal.

•	Adjust glass if necessary.

•	Make sure that the connector is connected properly.

•	Make sure that the door locks/unlocks and opens/closes properly.

Front Door Inside Handle

Repair procedures Replacement Put on gloves to protect your hands. &nb ...

Front Door Module

Components and components location Component Location 1. Front door module Repair procedures Front Door Module ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Overhead Console Lamp

Repair procedures Inspection 1. Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. Removal 1. Disconnect ...

Kia Stinger CK 2018-2024 Owners Manual: Integrated HomeLink® Wireless Control System

The HomeLink® Wireless Control System provides a convenient way to replace up to three hand-held radiofrequency (RF) transmitters with a single built-in device. This innovative feature will learn the radio frequency codes of most current transmitters to operate devices such as gate operators, ...