Kia Stinger: Propeller Shaft Assembly / Front Propeller Shaft

Kia Stinger CK 2018-2024 Service Manual / Driveshaft and axle / Propeller Shaft Assembly / Front Propeller Shaft

Repair procedures

Removal

1.	Raise the vehicle, and make sure it is securely supported.

2.	Remove the engine room side cover. D 2.2 R VGT (Refer to Engine Mechanical System - "Engine Room Under cover") G 2.0 T-GDI THETA II (Refer to Engine Mechanical System - "Engine Room Under cover") G 3.3 T-GDI LAMBDA II (Refer to Engine Mechanical System - "Engine Room Under cover")

Remove the front muffler stay (A).

Tightening torque:

29.4 - 39.2 N·m (3.0 - 4.0 kgf·m, 21.7 - 28.6 lb·ft)

[3.3 T-GDI LAMBDA II]

[2.0 T-GDI THETA II, 2.2 R VGT]

Remove the front propeller shaft (A).

Tightening torque:

49.0 - 68.6 N·m (5.0 - 7.0 kgf·m, 36.1 - 50.1 lb·ft)

•	Mark the location and direction of bolt and washer before removing the propeller shaft.

•	Installing the bolt and washer differently from the initial state can result in unbalanced propeller shaft causing abnormal vibration of propeller shaft at high speed.

5.	Install in the reverse order of removal.

Propeller Shaft

Repair procedures Inspection CV Joint and boots 1. Shift the transmission lever to Neutral. 2. Raise the vehicle off the ground, and support it wit ...

Differential Carrier Assembly

...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Engine Oil

Flow diagram Flow Diagram Repair procedures Oil and filter replacement • Prolonged and repeated contact with mineral oil will result in the removal of natural fats ...

Kia Stinger CK 2018-2024 Service Manual: Automatic Transmission System

Special service tools Special Service Tools Tool Name / Number Illustration Description Inhibitor switch guide pin (Parking switch guide pin) 09480-D2100 Used for fixing "N" range when inst ...