Kia Stinger: Front Seat / Front Seat Frame Assembly

Kia Stinger CK 2018-2024 Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Frame Assembly

Components and components location

Component Location

1. Front seat back frame assembly

2. Front seat cushion frame assembly

Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the front seat back cover. (Refer to Front Seat - "Front Seat Back Cover")

2.	Remove the front seat cushion cover. (Refer to Front Seat - "Front Seat Cushion Cover")

3.	Remove the lumbar support assembly. (Refer to Body Electrical System - "Lumbar Support Unit")

4.	After loosening the mounting bolts, disconnect the front seat back frame assembly (A) and front seat cushion frame assembly (B).

5.	Install in the reverse order of removal.

Front Seat Cushion Cover

Components and components location Component Location 1. Front seat cushion cover Repair procedures Replacement ...

Front Seat Belt

Components and components location Components 1. Front seat belt retractor 2. Rear seat belt retractor [RH] 3. Rear center seat belt retractor 4. Rea ...

Other information:

Kia Stinger CK 2018-2024 Owners Manual: Brake fluid

Checking the brake fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX (Maximum) and MIN (Minimum) marks on the side of the reservoir. Before removing the reservoir cap and adding brake fluid, clean the area around the reservoir cap thorough ...

Kia Stinger CK 2018-2024 Service Manual: Headlamp Leveling Switch (Manual)

Schematic diagrams Circuit Diagram Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. ...