Kia Stinger: Body Side Molding / Front Wheel Guard

Kia Stinger CK 2018-2024 Service Manual / Body (Interior and Exterior) / Body Side Molding / Front Wheel Guard

Repair procedures
Replacement
  

Put on gloves to protect your hands.

  

Use a plastic panel removal tool to remove interior trim pieces without marring the surface.

Take care not to bend or scratch the trim and panels.

1.

Remove the front tire.

2.

After loosening the mounting clips, nuts, bolts and screws, remove the front wheel guard (A).

3.

Install in the reverse order of removal.

  

Replace any damaged clips.

Hood Garnish
Repair procedures Replacement    Put on gloves to protect your hands.  &nbs ...

Rear Wheel Guard
Repair procedures Replacement    Put on gloves to protect your hands.  &nbs ...

Other information:

Kia Stinger CK 2018-2024 Owners Manual: Rear turn signal lamp (bulb type) bulb replacement


1. Open the liftgate. 2. Open the service cover. 3. Loosen the light assembly retaining screws with a cross-tip screwdriver or spanner. 4. Remove the rear combination lamp assembly from the body of the vehicle. 5. Disconnect the rear combination lamp connector. 6. Remove the socket ...

Kia Stinger CK 2018-2024 Service Manual: Sub Fuel Sender


Repair procedures Removal 1. Release the residual pressure in fuel line. (Refer to the Fuel Delivery System - "Release Residual Pressure in Fuel Line") 2. Switch "OFF" the ignition and disconnect the negative (-) battery ...

Copyright © www.kstinger.com 2015-2024