Kia Stinger: Fuel Filler Door / Fuel Filler Door Open Switch

Kia Stinger CK 2018-2024 Service Manual / Body Electrical System / Fuel Filler Door / Fuel Filler Door Open Switch

Components and components location

Components

Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel")

3.	Remove the crash pad garnish [LH] (A) after loosening the mounting screw.

4.	Remove the side crash pad switch (A) after loosening the mounting screws.

5.	Disconnect the side crash pad switch connector (A).

Installation

1.	Connect the side crash pad switch connector.

2.	Install the side crash pad switch.

3.	Install the crash pad garnish [LH].

4.	Install the crash pad lower panel.

5.	Connect the negative (-) battery terminal.

Inspection

1.	Check for continuity between the terminals. If there is an abnormality, replace the switch.

Fuel Filler Door Release Actuator

Repair procedures Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the luggage side trim [LH]. (Refer to Body - "Luggage S ...

Fuses And Relays

Components and components location Component Location [Engine Room] 1. Engine room junction block [Interior Fuse & Relay] ...

Other information:

Kia Stinger CK 2018-2024 Service Manual: Coolant

Repair procedures Refilling And Bleeding Never remove the radiator cap when the engine is hot. Serious scalding could be caused by hot fluid under high pressure escaping from the radiator. ...

Kia Stinger CK 2018-2024 Service Manual: Windshield Glass

Components and components location Components 1. Windshield glass 2. Windshield molding mounting bracket 3. Windshield glass side molding 4. Windshield glass upper molding Repair procedures Removal ...