Kia Stinger: Headlamp Leveling System / Headlamp Leveling Switch (Manual)
Schematic diagrams
Repair procedures
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
|
3. |
Remove the crash pad garnish [LH] (A) after loosening the mounting screw.
|
4. |
Remove the side crash pad switch (A) after loosening the mounting screws.
|
5. |
Disconnect the side crash pad switch connector (A).
|
1. |
Connect the side crash pad switch connector.
|
2. |
Install the side crash pad switch.
|
3. |
Install the crash pad garnish [LH].
|
4. |
Install the crash pad lower panel.
|
5. |
Connect the negative (-) battery terminal.
|
Components and components location
Circuit Diagram
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
...
Components and components location
Circuit Diagram
Description and operation
Description
According to driving environment and loading state of vehicle, headlamp lightin ...
Other information:
Repair procedures
Replacement
Do not apply sealant to the body.
1.
Using a screwdriver, remove the tailgate lifter (B) after removing the
socket clips (A).
2.
...
Description and operation
Description
The In-car air temperature sensor is built in the heater & A/C control unit.
The sensor consists of a thermistor that measures the inside temperature. The
signal decided by the resistance value that changes in accordance with perceived
i ...